Agilent Technologies 16718A Help Volume page 150

• Find 2 edges too close together
Becomes true when the second specified edge occurs within a specified
time after the first specified edge.
• Find 2 edges too far apart
Becomes true when the second specified edge does not occur within a
specified time after the first specified edge.
• Find pattern occurring too soon after edge
Becomes true when a specified pattern occurs within a specified time after
the first specified edge.
• Find pattern occurring too late after edge
Becomes true when a specified pattern does not occur within a specified
time after the first specified edge.
• Find glitch
Becomes true when the specified glitch occurs in one sample.
• Wait t seconds
Becomes true when the specified amount of time has expired.
• Wait for arm in
When the logic analyzer is armed by another instrument (as specified in
the Intermodule window), this trigger function becomes true when the
arm signal is received.
• Wait for second analyzer to trigger
When the logic analyzer's pods are assigned to two analyzers, this trigger
function becomes true when the other analyzer triggers.
• Wait for flag
Becomes true when the specified flag has the specified value. This trigger
function tests for a flag event.
• Set/clear/pulse flag
Becomes true on any sample and sets, clears, pulse sets, or pulse clears
the specified flag. This trigger function inserts a flag action.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 3: Reference
The Trigger Tab
149