Agilent Technologies 16718A Help Volume page 36

Chapter 2: Task Guide
Probing the Device Under Test
correctly, and may include an inverse assembler. The circuit board
provides access to logical groups of pins through headers designed to
connect directly to the logic analyzer.
The easiest way to set up a measurement with an analysis probe is the
Setup Assistant (see the Setup Assistant help volume). The Setup
Assistant asks you questions about your measurement and then shows
you just the information you need to set up the probe correctly. It also
loads the proper configuration files.
See Also http://www.agilent.com/find/Laaccessories/ for more information on
Agilent logic analyzer probing accessories.
35
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com