Agilent Technologies 16718A Help Volume page 189

Chapter 3: Reference
Specifications and Characteristics
Sample period:
Sample period accuracy:
period)
Channel-to-channel skew:
Time interval accuracy:
to-chan
time interval)]
Minimum data pulse width:
Maximum trigger sequencer speed:
Trigger resources:
range),
Trigger resource conditions:
combinations
Maximum global counter:
Maximum occurrence counter:
Timer value range:
Timer resolution:
Timer accuracy:
Greater than duration:
increments
Less than duration:
increments
Timer rest latency:
Data in to BNC port out delay:
Flag set/reset to evaluation:
Triggering
- Maximum Trigger Sequencer Speed: 167 MHz
- State Sequence Levels:
- Timing Sequence Levels:
- Sequence Level Branching:
- Maximum Occurrence Count Value:
- Pattern Recognizers:
- Range Recognizers:
- Range Width:
- Occurrence Counters:
- Global Counters:
- Flags:
- Flag set/reset to evaluation:
- Timers:
- Timer Value Range:
- Timer Resolution:
- Timer Accuracy:
- Timer Reset Latency:
- Glitch/Edge Recognizers:
- Minimum Detectable Glitch:
- Greater Than Duration:
- Less Than Duration:
- Data In to Trigger Out:
Power Requirements
All necessary power is supplied by the backplane connector of
the logic analysis system mainframe.
Operating Environment Characteristics
- Indoor use only.
- Temperature
Instrument (except disk and media): 0 to 50 degrees C (+32
Probe lead sets and cables:
- Humidity
Instrument, probe lead sets, and cables: up to 80% relative humidity at
188
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3.0 ns to 1 ms
+/- (100ps + 0.01% of sample
< 1.5 ns
+/- [sample period + (chan-
skew) + (0.01% of
4.0 ns
167 MHz
16 patterns(=,/=,<,>,<=,>=),
15 ranges(in range,not in
2 edge/glitch,
(2 timers per module) -1
2 global counters,
1 occurrence counter per
sequence level,
4 flags
Arbitrary boolean
16,777,215
16,777,215
100 ns to 5497 sec
5 ns
+/- (10 ns + 0.01%)
5 ns to 83 ms in 5 ns
10 ns to 83 ms in 5 ns
65 ns
150 ns
110 ns
16
16
Arbitrary 4-way "If/then/else"
16,777,215
16
15
32
1 per sequence level
2
8, can be used between modules
110 ns, typical
(2 x number of cards) - 1
100 ns to 5497 seconds
5 ns
+/- 10 ns + 0.01%
70 ns
2 per pod pair (timing only)
1.5 ns
6 ns to 100 ms in 6-ns increments
12 ns to 100 ms in 6-ns increments
150 ns, typical
to 122 degrees F)
0 to 65 degrees C (+32 to
149 degrees F)