Garmin G950 Pilot's Manual page 50

SYSTEM OVERVIEW
DATE/TIME
The system time is displayed in the lower right corner of the PFD. Time and date format (local 12-hr,
local 24-hr, or UTC) are modified on the System Setup Page. Universal Coordinated Time (UTC; also called
Greenwich Mean Time (GMT) or Zulu) date and time are calculated directly from the GPS satellites signals
and cannot be changed. An offset is provided to add or subtract the desired amount of time (hours:minutes)
from UTC to define current local time.
Configuring the system time:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the 'Time Format' field.
4) Turn the small FMS Knob to select the desired format and press the ENT Key to confirm selection. The 'Time
Offset' field is highlighted (for local time formats).
5) Use the FMS Knob to enter the desired time offset (±HH:MM) and press the ENT Key to confirm selection.
DISPLAY UNITS
Units in which various quantities are displayed on the G950 screens can be changed on the System Setup
Page.
Changing a display units setting:
1) Use the FMS Knob to select the AUX - System Setup Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired field in the 'Display Units' box.
4) Turn the small FMS Knob to select from a list of measurement units and press the ENT Key when the desired
unit is highlighted.
38 Garmin G950 Pilot's Guide for the Pilatus PC-6 190-00870-02 Rev. A