Garmin G950 Pilot's Manual page 368

HAZARD AVOIDANCE
Traffic information is also displayed on the PFD when the Synthetic Vision System (SVS) option is installed and
enabled. See the Additional Features Section for details.
Displaying traffic on the Traffic Map Page:
1) Use the large FMS Knob to select the Map Page Group.
2) Use the small FMS Knob to select the Traffic Map Page.
3) Press the NORMAL Softkey to begin displaying traffic. OPERATING is displayed in the Traffic mode field.
4) Press the ALT MODE Softkey to change the altitude volume.
5) Press the STANDBY Softkey to place the system in the Standby mode. STANDBY is displayed in the Traffic mode
field.
6) Turn the Joystick clockwise to display a larger area or counter-clockwise to display a smaller area.
Operating
Mode
Altitude
Mode
Traffic Advisory,
500' Below,
Climbing
"Non-Bearing"
Traffic (Bearing
Undetermined),
Distance 4.0
nm, 500' Above,
Descending
Proximity
Advisory, 900'
Above, Level
The Traffic Map Page shows surrounding TAS traffic data in relation to the aircraft' s current position and
altitude, without basemap clutter. It is the principal map page for viewing TAS traffic information. Aircraft
orientation is always heading up unless there is no valid heading. Map range is adjustable with the Joystick
from 2 to 40 nm, as indicated by the map range rings.
The traffic mode and altitude display mode are annunciated in the upper left corner.
Displaying traffic information (maps other than the Traffic Map Page):
1) Press the MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
356
Figure 6-72 Traffic Map Page
Garmin G950 Pilot's Guide for the Pilatus PC-6
Traffic Display
Range Ring
Non-Threat
Traffic, 2500'
Above,
Descending
Traffic
Advisory Off
Scale, 400'
Below, Level
Non-Threat
Traffic,
Altitude Not
Reported
190-00870-02 Rev. A