Garmin G950 Pilot's Manual page 335

HAZARD AVOIDANCE
The Profile Path rectangle may be configured on or off, and the Navigation Map range at which the Profile
Path is removed from map display can be changed.
Customizing the Profile Path display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With 'Map Setup' highlighted, press the ENT Key (Figure 6-35).
4) Turn the small FMS Knob to select the 'Profile' Group and press the ENT Key (Figure 6-36).
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections (Figure 6-37).
• PROFILE PATH – Turns the display of the Profile Path on or off and sets maximum map range at which the Profile
Path is shown
6) Turn the small FMS Knob to scroll through options (ON/OFF, range settings).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.
Figure 6-35 Navigation Map Page Menu
Figure 6-37 Navigation Map Page Setup Menu,
Figure 6-36 Navigation Map Page Setup Menu
Profile Group
Garmin G950 Pilot's Guide for the Pilatus PC-6
190-00870-02 Rev. A 323