Garmin G950 Pilot's Manual page 482

Integrated avionics system for pilatus pc-6
Hide thumbs Also See for G950:
Table of Contents

Advertisement

APPENDIX B
5) Acknowledge the Power-up Page agreement by pressing the ENT Key or the right most softkey.
6) Turn the large FMS Knob to select the AUX Page group on the MFD.
7) Turn the small FMS Knob to select the System Status Page.
8) Monitor the Sync Status in the Database Window. Wait for all databases to complete synching, indicated by
'Complete' being displayed as seen in Figure B-9.
9) Remove and reapply power to the system.
10) Turn the large FMS Knob to select the AUX Page group on the MFD.
11) Turn the small FMS Knob to select the System Status Page.
12) Press the Display Database Selection Softkey to show database information for each display (MFD1 DB, PFD1
DB). Verify the correct database cycle information is shown for each database for each display.
u
t
PDating
errain
1) With system power OFF, remove the Supplemental Data Card from the bottom card slot of the MFD and PFD.
2) Copy the updated terrain database to each of the Supplemental Data Cards. Copy the updated FliteCharts or
ChartView database to one Supplemental Data Card.
3) Insert the updated Supplemental Data Cards into the bottom card slot of the MFD and PFD. The Supplemental
Data Card containing the FliteCharts or ChartView database is inserted in the MFD.
4) Apply power to the system, check that the databases are initialized and displayed on the power-up screen
(Figure B-10). A 'Verifying' message may be seen. If this message is present, wait for the system to finish
loading before proceeding to step 5.
5) Acknowledge the Power-up Page agreement by pressing the ENT Key or the right-most softkey.
6) Turn the large FMS Knob to select the AUX Page group on the MFD.
7) Turn the small FMS Knob to select the System Status Page.
8) Press the Display Database Selection Softkey to show database information for each display (MFD1 DB, PFD1
DB). Verify the correct database cycle information is shown for each database for each display.
9) Remove power from the system.
470
MFD1 DB
MFD1 DB
Unselected
MFD1 DB Selected PFD1 DB Selected
Figure B-11 Display Database Softkey
, f
c
,
c
lite
harts
anD
hart
Garmin G950 Pilot's Guide for the Pilatus PC-6
PFD1 DB
V
D
ieW
ataBases
190-00870-02 Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents