Garmin G950 Pilot's Manual page 46

SYSTEM OVERVIEW
Or :
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the MENU Key.
3) Highlight 'Restore Defaults' and press the ENT Key.
PILOT PROFILES
System settings may be saved under a pilot profile. When the system is powered on, the last selected pilot
profile is shown on the MFD Power-up Splash Screen. The G950 can store up to 25 profiles; the currently
active profile, the amount of memory used, and the amount of memory available are shown at the top of
the System Setup Page in the box labeled 'Pilot Profile'. From here, pilot profiles may be created, selected,
renamed, or deleted.
Creating a profile:
1) Select the AUX - System Setup 1 Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight 'CREATE' in the Pilot Profile Box.
4) Press the ENT Key. A 'Create Profile' window is displayed.
5) Use the FMS Knob to enter a profile name up to 16 characters long and press the ENT Key. Pilot profile names
cannot begin with a blank as the first letter.
6) In the next field, use the small FMS Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
34
Figure 1-31 Display Unit Settings (System Setup Page)
Garmin G950 Pilot's Guide for the Pilatus PC-6 190-00870-02 Rev. A