Garmin G950 Pilot's Manual page 334

HAZARD AVOIDANCE
Profile View
Path Enabled
Altitude Scale
The Profile View is based on the current aircraft track (or heading if track is unavailable) and shows the highest
known terrain or obstacles within a predetermined width from the present aircraft position to the end of the
profile range. The width of the Profile View (Table 6-8) is determined by the phase of flight, as annunciated on
the HSI. Refer to the Flight Instruments section for more information about flight phases.
PROFILE PATH
The Profile Path displays the horizontal and lateral boundaries of the Profile View. The path is shown as a
white rectangle on the Navigation Map Page (Figure 6-34) and is only available when Profile View is enabled.
White range markers both edges of the Profile Path rectangle match the range markers along the distance scale
inside the Profile View display window whenever the profile range is at least four nm (or 7.5 km if configured
for metric units).
322
Distance Scale
Figure 6-34 Profile View on Navigation Map with Terrain Display Enabled
Flight Phase
Approach
Departure
Terminal
Enroute
Oceanic
Table 6-8 Profile View Width
Garmin G950 Pilot's Guide for the Pilatus PC-6
Total Profile View Width
0.6 nm
0.6 nm
2.0 nm
4.0 nm
4.0 nm
Navigation Map Range
Terrain Legend
Profile View Length
is One Half of the
Navigation Map
Range
190-00870-02 Rev. A