System Status - Garmin G950 Pilot's Manual

Muting the "TIS Not Available" voice alert:
1) Select the Traffic Map Page.
2) Press the TNA MUTE Softkey. The status is displayed in the upper left corner of the Traffic Map Page.
Or :
a) Press the MENU Key.
b) Select '''Not Available" Mute On' (shown if TNA muting is currently off) and press the ENT Key.

SYSTEM STATUS

The G950 performs an automatic test of TIS during power-up. If TIS passes the test, TIS enters Standby Mode
(on the ground) or Operating Mode (in the air). If TIS fails the power up test, an annunciation is shown in the
center of the Traffic Map Page.
Traffic Map Page Center
Banner Annunciation
* Contact a service center or Garmin dealer for corrective action
System Test has
Failed
190-00870-02 Rev. A
NO DATA
Data is not being received from the transponder*
Data is being received from the transponder, but a failure is
DATA FAILED
detected in the data stream*
FAILED
The transponder has failed*
UNAVAILABLE
TIS is unavailable or out of range
Table 6-18 TIS Failure Annunciations
Figure 6-71 TIS Power-up Test Failure
Garmin G950 Pilot's Guide for the Pilatus PC-6
HAZARD AVOIDANCE
Description
Data Not
Received from
Transponder
351