Garmin G950 Pilot's Manual page 461

Message
MFD1 DB ERR – MFD1 multiple
database errors exists.
PFD1 DB ERR – PFD1 multiple
database errors exists.
DB MISMATCH – Navigation
database mismatch. Xtalk is off.
DB MISMATCH – Standby Navigation
database mismatch.
DB MISMATCH – Terrain database
mismatch.
DB MISMATCH – Obstacle database
mismatch.
DB MISMATCH – Airport Terrain
database mismatch.
NAV DB UPDATED – Active
navigation database updated.
TERRAIN DSP – [PFD1 or MFD1]
Terrain awareness display unavailable.
GMA 347 MESSAGE ADVISORIES
Message
GMA1 FAIL – GMA1 is inoperative.
GMA1 CONFIG – GMA1 configuration
error. Config service req'd.
MANIFEST – GMA1 software
mismatch. Communication halted.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
190-00870-02 Rev. A
Comments
The MFD and/or PFD detected a failure in more than one database. If problem
persists, the system should be serviced.
The PFD and MFD have different navigation database versions or regions installed.
Crossfill is off. Check the AUX-SYSTEM STATUS Page to determine versions or regions.
Also, check the AUX-SYSTEM STATUS Page for a database synchronization function
not completed. After synchronization is complete, power must be turned off, then on.
The PFD and MFD have different standby navigation database versions or regions
installed. Check the AUX-SYSTEM STATUS Page to determine versions or regions.
Also, check the AUX-SYSTEM STATUS Page for a database synchronization function
not completed. After synchronization is complete, power must be turned off, then on.
The PFD and MFD have different terrain database versions or regions installed. Check
the AUX-SYSTEM STATUS Page to determine versions or regions. Also, check the AUX-
SYSTEM STATUS Page for a database synchronization function not completed. After
synchronization is complete, power must be turned off, then on.
The PFD and MFD have different obstacle database versions or regions installed.
Check the AUX-SYSTEM STATUS Page to determine versions or regions. Also,
check the AUX-SYSTEM STATUS Page for a database synchronization function not
completed. After synchronization is complete, power must be turned off, then on.
The PFD and MFD have different airport terrain database versions or regions installed.
Check the AUX-SYSTEM STATUS Page to determine versions or regions. Also,
check the AUX-SYSTEM STATUS Page for a database synchronization function not
completed. After synchronization is complete, power must be turned off, then on.
System has updated the active navigation database from the standby navigation
database.
One of the terrain, airport terrain, or obstacle databases required for TAWS in the PFD
or MFD is missing or invalid.
Comments
The audio panel self-test has detected a failure. The audio panel is unavailable. The
G950 system should be serviced.
The audio panel configuration settings do not match backup configuration memory.
The G950 system should be serviced.
The audio panel has incorrect software installed. The G950 system should be
serviced.
The audio panel self-test has detected a problem in the unit. Certain audio functions
may still be available, and the audio panel may still be usable. The G950 system
should be serviced when possible.
Garmin G950 Pilot's Guide for the Pilatus PC-6
APPENDIX A
449