G950 Controls; Pfd/Mfd Controls - Garmin G950 Pilot's Manual

1.5 G950 CONTROLS

The G950 controls have been designed to simplify operation of the system and minimize workload and the time
required to access sophisticated functionality. Controls are located on the PFD and MFD bezels, MFD Control
Unit, and Audio Panel. PFD and MFD controls and softkeys are discussed in this section. Audio Panel controls
are described in the Audio Panel and CNS section; see the Audio Panel and CNS Section for more information
about NAV/COM controls.

PFD/MFD CONTROLS

1 2
18
NAV VOL/ID Knob
1
NAV Frequency
2
Transfer Key
NAV Knob
3
Heading Knob
4
190-00870-02 Rev. A
3 4 5
17
Figure 1-13 PFD/MFD Controls
Turn to control NAV audio volume (shown in the NAV Frequency Box as a percentage)
Press to toggle Morse code identifier audio ON/OFF
Transfers the standby and active NAV frequencies
Turn to tune NAV receiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle cyan tuning box between NAV1 and NAV2
Turn to manually select a heading
Press to display a digital heading momentarily to the left of the HSI and synchronize the
Selected Heading to the and current heading
Garmin G950 Pilot's Guide for the Pilatus PC-6
6 7 8 9
SYSTEM OVERVIEW
13
10
11 14
12
15
16
19