Chapter 12 Parameters And Defaults - Denso GT10B-SU User Manual

Chapter 12 Parameters and Defaults

The tables below list the parameters and their defaults. Those parameter settings can be changed with the bar-coded
parameter menu and configuration software (ScannerSetting), except shadowed ones only with the configuration software.
When the scanner leaves the factory, all of these parameters are set to defaults.
(1) Interface to the host
Items
Interface
(2) Communications parameters for USB keyboard interface
The following settings take effect only when the USB keyboard interface is set up.
Items
Caps Lock
Keyboard type
Data transmission interval
(Note 1) Select the Caps Lock state which matches that of the connected keyboard.
Parameters
USB keyboard interface
USB-COM interface
Parameters
OFF (Lowercase letter)
ON (Uppercase letter)
U.S. English (101 key type)
Germany (102 key type)
French (102 key type)
U.K. English (102 key type)
Italian (102 key type)
Swedish (102 key type)
Japanese (106 key type)
3 ms
6 ms
10 ms
16 ms
30 ms
50 ms
100 ms
: Can be changed only with the configuration software.
45
Defaults Refer to:
√
Defaults Refer to:
√
Section 11.1 (1)
(See Note 1.)
√
Section 11.1 (2)
√
Section 11.1 (3)