Windows 98SE
(1) Switch the computer on to run Windows 98SE.
(2) Connect the scanner to the computer or USB hub.
(3) The Add New Hardware Wizard starts.
Click Next to proceed.
(4) Select Search for the best driver for your device (Recommended), then click Next.
(5) Select the Specify a location check box, specify the WIN9X folder in a folder where the downloaded file has been
extracted, and then click Next.
Note: Do not specify any folder other than the WIN9X. Doing so might affect the system.
Note: The sample window below shows that the downloaded file is stored and extracted in the C: DNWA USBCOM
folder. Specify the appropriate folder in your computer instead of C: DNWA USBCOM.
11