Denso GT10B-SU User Manual page 63

(7) Reading modes
Items
Scanning modes
Verification result output in data
verification mode
(Report of match/mismatch status)
Verification start position in data
verification mode
Number of characters to be verified, starting
from the verification start position
Scan lock in data verification mode
(8) Notification of a reading failure
Items
Notification of a reading failure that
occurred under software control
Parameters
Regular read mode
Data verification mode
Disable transmission/
Disable transmission
Enable bar code data transmission/
Disable transmission
Enable bar code data transmission/
Enable NG transmission
Enable OK transmission/
Enable NG transmission
1st character
2nd character
3rd character
4th character
5th character
6th character
7th character
1 character
2 characters
3 characters
4 characters
5 characters
6 characters
7 characters
Not specified
Enable
Disable
Parameters
Enable CAN transmission
Enable ERROR transmission
Disable transmission
: Can be changed only with the configuration software.
54
Defaults Refer to:
√
√
√
Section 8.1
√
√
Defaults Refer to:
√
Section 6.2