Verification Conditions - Denso GT10B-SU User Manual

8.1.2 Verification conditions

You can specify a verification starting position and the number of characters to check.
• Starting position:
• Number of characters: The choices are 1 through 7 and everything following the starting position (up to a maximum of
For example, you can specify all characters or particular characters of bar code data to check as shown below.
Master bar code data
12345601
Bar code data readable
12345601
Master bar code data
12345601
Bar code data readable
01347803
Note: Bar code data whose symbology is different from that of the master bar code data produces a mismatch even if
the data matches
Note: Turning off the scanner clears the master bar code stored.
The choices are 1st through 7th characters.
32 characters).
Verification conditions: All characters to check
To check all characters as underlined at left, for example, set the following:
- Starting position:
- Number of characters:
Max. 32 bytes of bar code data can be verified.
Verification conditions: Particular characters to check
To check the characters as underlined at left, for example, set the following:
- Starting position:
- Number of characters: 2 characters
1st character
All characters
3rd character
29