Denso GT10B-SU User Manual page 59

Item
Check digit method for Codabar (NW-7)
Transmission of start/stop codes
for Codabar (NW-7)
Code 39
Item
Scanning Code 39
Minimum number of digits readable
for Code 39
Maximum number of digits readable
for Code 39
Transmission of a check digit for Code 39
Transmission of start/stop codes for Code 39
Conversion to Full ASCII for Code 39
Code 93
Items
Scanning Code 93
Minimum number of digits readable
for Code 93
Maximum number of digits readable
for Code 93
(Note 3) The setting range does not mean the number of digits that the scanner can read.
(Note 4) To enable the transmission of a check digit, it is also necessary to select the "Enable, with C/D" parameter.
Parameters
MOD-16
7-check method
Transmit a/b/c/d
Transmit A/B/C/D
Disable
Parameters
Enable, without C/D
Enable, with C/D
Disable
1 to 99 digits
(excluding start/stop codes)
Enable
Disable
Enable
Disable
Enable
Disable
Parameters
Enable
Disable
1 to 99 digits
(excluding start/stop codes and 2-digit
C/D)
: Can be changed only with the configuration software.
50
Defaults Refer to:
√
Section 11.3 (5)
√
Defaults Refer to:
√
1 digit
(See Note 3.)
99 digits
√
Section 11.3 (5)
(See Note 4.)
√
Section 11.3 (5)
√
Defaults Refer to:
√
1 digit
(See Note 3.)
99 digits