Chapter 12 Parameters And Defaults; Bluetooth Communications Parameters - Denso GT10B-SB User Manual

Chapter 12 Parameters and Defaults

The tables below list the parameters and their defaults. Those parameter settings can be changed with the bar-coded
parameter menu and configuration software (ScannerSetting), except shadowed ones only with the configuration
software.
When the scanner leaves the factory, all of these parameters are set to defaults.
®
(1) Bluetooth communications parameters
Items
Communications protocol
Header
Terminator
ACK/NAK response time
Configure the scanner as master or slave
Timeout period for slave to wait for a
connection request
Timeout period for automatic disconnection
®
of the Bluetooth wireless link
Clear the transfer buffer when the
®
Bluetooth link breaks
Parameters
Non-acknowledge mode
ACK/NAK mode
Data packaging mode (to host)
Data packaging mode (to BA10-RKU)
None
STX
ETX
CR
LF
CR LF
None
1 to 25 seconds
(0.1 to 9.9 seconds on models that do
not support data packaging)
As a master
As a slave
2 minutes
4 minutes
10 minutes
30 minutes
5 to 640 minutes
Disable automatic disconnection
Enable
Disable
: Can be changed only with the configuration software.
53
Defaults Refer to:
√
Section 10.1 (1)
√
√
Section 10.2.1 (1)
1 s Section 10.1 (1)
Section 2.2
√
√
Section 10.1 (2)
485 min.
Section 10.1 (3)
Section 10.1 (4)
√