Parenthesizing Ais (Application Identifier) In Ean-128 Data; Extracting Ai (Application Identifier)-Prefixed Strings From Ean-128 Data - Denso GT10B-SU User Manual

9.4

Parenthesizing AIs (Application Identifier) in EAN-128 Data

The scanner parenthesizes all AIs contained in EAN-128 data read and transfers the data.
The following sample bar code and scanner settings output data with AIs parenthesized as listed below.
- Bar code sample
Bar code type: EAN-128, Data read: 0194901234567894110308081303081017040208
- Scanner settings
Header: STX, Terminator: ETX, Prefix/Suffix: None, Code ID mark: Type 1,
Transmission of number of digits: 2 digits
(Example)
[STX]W48(01)94901234567894(11)030808(13)030810(17)040208[ETX]
9.5

Extracting AI (Application Identifier)-Prefixed Strings from EAN-128 Data

The scanner extracts element strings prefixed with the specified AIs (up to three types of AIs) and separates them
with the specified delimiters (selectable from headers/terminators, commas, and tabs) instead of AIs to transfer them.
The following sample bar code and scanner settings output data as listed below depending upon the AI conditions.
- Bar code sample
Bar code type: EAN-128, Data read: (01)94901234567894(11)030808(13)030810(17)040208
- Scanner settings
Header: STX, Terminator: ETX, Prefix/Suffix: None, Code ID mark: Type 1,
Transmission of number of digits: 2 digits
(1) Header/terminator
Specifying a header/terminator as a delimiter prefixes a header and suffixes a terminator to each element string
separated.
A prefix, suffix, the number of digits, and code ID mark can be also added to each element string if their
transmissions are enabled. The number of digits is that in each element string after editing.
(Example)
AIs specified
AI1=01, AI2=17
(2) Comma
Specifying a comma as a delimiter outputs comma-delimited data. No comma follows the tail of the data.
A header and terminator are added to the full string. A prefix, suffix, the number of digits, and code ID mark can be
also added to the full string if their transmissions are enabled. The number of digits is that in the full string after
editing.
(Example)
AIs specified
AI1=01, AI2=17
Output data
[STX]W1494901234567894[ETX] [STX]W06040208[ETX]
[STX]W2194901234567894,040208[ETX]
35
Output data
Output data