Ptz - EverFocus EMV1200 FHD User Manual

7.3.9

PTZ

You can use the PTZ Control Panel to control the connected PTZ (analog/IP speed dome)
cameras. Before using this function, please connect the PTZ camera to the system and
configure the PTZ settings in advance (please refer to PTZ ID in 6.1.1 Analog Camera).
To control the PTZ camera:
1. Select a connected PTZ camera in the Camera drop-down list first.
2. To move the camera to the desired direction and angle, click the Direction buttons.
3. To zoom in / out the camera view, click the Zoom +/- buttons.
4. To adjust the camera focus, click the Focus +/- buttons.
5. To adjust the Iris open to increase / decrease the amount of light in, click the Iris +/- buttons.
Control PTZ Camera over EKB200 Keyboard:
When using an EKB200 keyboard, you need to click the Connect button on the PTZ Control Panel.
For information about the installation of the EKB200 keyboard, please refer to your EKB200
keyboard User's Manual.
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
184