EverFocus EMV1200 FHD User Manual page 207

Click Virtual Servers on the left to bring up the following screen.
Virtual Servers allows users who are connecting remotely to access services on the router's Local
Network. The functions of each field are described below.
Virtual Server - Select Enabled or Disabled
Name - Enter the name referencing the virtual service
Private IP - The IP address of the device running the local services.
Protocol Type - The protocol used for the virtual service.
Private Port – The port number that the service uses on the LAN (Local Area Network).
Public Port - The port number that the services uses on the WAN (Wide Area Network).
Schedule – The time period the virtual server will be active.
When you have input all the information for a virtual server, click on Apply to add it to the list
at the bottom or Cancel to clear all fields.
Here is an example of the information for each service:
Name Private IP
HTTP 192.168.1.50 Both
Where 192.168.1.50 is the IP address of the mobile DVR on the LAN, and the default port 80 is in
use.
Note: If you changed port 80 in the mobile DVR's Network Menu, open that port instead of 80.
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
Protocol Private Port
80
197
Public Port Schedule
80 Enable