EverFocus EMV1200 FHD User Manual page 202

12ch/8ch hybrid mobile dvr
Hide thumbs Also See for EMV1200 FHD:
Table of Contents

Advertisement

Pre-Installation
Before beginning the installation, please answer the following questions:
Do you have Hi-speed Internet?
There are many types of high speed Internet available. The most common ones are T1, Cable,
and DSL (in order of speed). The mobile DVR is not compatible with a dial-up connection.
Note: EverFocus suggests having a minimum upload speed of 256KBps. This can be addressed
by your Internet Service Provider.
What type of modem/router do you have? _________________________
The modem/router was either installed by your Internet service provider or purchased by you
to establish a connection to the Internet. A router assigns different internal IP addresses to
local computers; this allows multiple computers to access the Internet through the same
external IP address.
Do you have a static IP address? ______________
A Static IP address means you use the same IP address every time you connect to the Internet.
With a static IP address, other Internet users always know the address of your location and
can easily connect with it. This makes it much simpler to host a website, email server, or other
type of server connection. Everfocus suggests using a static IP address. If this is not available,
you will need to use a dynamic IP address. This is explained below.
Do you have a dynamic IP address?
A Dynamic IP address means your IP address changes each time you connect to the Internet.
We recommend asking your Internet service provider for a Static IP address. If this is not a
possibility, you may use the DDNS feature of the mobile DVR. DDNS stands for Dynamic
Domain Name Server, a service that provides a central database where IP information can be
stored and retrieved. It allows those using a dynamic IP address to be registered centrally so
users can connect to it by name. See 7.3.4.5 DDNS for details on using EverFocus DDNS.
What type of (mobile) DVR are you installing? ______________
The default ports are
ECOR264: 80
Paragon: 80
ECOR: 80, 1600
EDR/Emobile DVR: 80, 1600, and 37260 – 37263
EMV: 80
ELUX: 80
If the ports were changed in the Network Setup, use those port numbers.
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
______________
Modem/router model name/ #
______________
192

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emv800 fhd

Table of Contents