Turning On / Off The Power; Accessing The Mobile Dvr - EverFocus EMV1200 FHD User Manual

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

2.7 Turning On / Off the Power

Before powering on the mobile DVR, please make sure the internal HDD have been installed
properly. Once you have completed the basic cable connections, you are ready to turn on the
mobile DVR. Simply plug in the power source. The POWER LED will light up if power is normal.
Once the system has finished loading, you can start setting up the menu options for the mobile
DVR.
To turn off the power, please go to OSD Root Menu > System > Sys Setting > Miscellaneous
setting page, and click Shutdown (refer to 6.7.7 Miscellaneous). After the message pops up as
below, you can now turn off the power source.
Note that when the mobile DVR is placed in an environment where temperature is very low (for
example, -40°C, the mobile DVR will NOT turn on immediately.)
2.8

Accessing the Mobile DVR

You can look up the IP address and access the Web interface of the mobile DVR using the IP
Utility (IPU) program, which is included in the software CD. The IP Utility can also be
downloaded from EverFocus' Website EverFocus website (key word search: "IP Utility").
Please connect the mobile DVR on the same LAN of your computer.
1. Save IP Utility Setup .exe in your computer. Double click the .exe file and follow the
on-screen instructions to install the IP Utility.
24