Connecting To A Car With 12 Vdc - EverFocus EMV1200 FHD User Manual

2.4.2

Connecting to a Car with 12 VDC

Glove box (inside or underneath)
Driver seat (between the seat and side panel)
+
Vehicle Battery
12V
12V+ (Red)
-
Note:
1. If the car is without an ignition key, please connect the IGN (yellow) wire directly or
via a switch to the vehicle battery.
2. Please note that since the power of mobile DVR is directly connected to the vehicle
battery, the mobile DVR will always draw power (2.5mA) from the vehicle battery.
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
Passenger seat (underneath)
EMV1200 FHD (Rear Panel)
ACC
Power Harness Cable
IGN (Yellow)
GND (Black)
16
Trunk
9-12 CH
Fuse (15A)