EverFocus EMV1200 FHD User Manual page 53

8 Call Monitor
9 Layout
10 OSD Overlay
11 Channel
12 System
13 Exit
Click to switch to the Call monitor settings. Click
to the Main monitor settings.
After switching to Call monitor, users can only operate the
Information, Sequence, Layout, Display, Channel and Main Monitor
buttons on the OSD Root Menu; the other buttons will gray out.
Note that the Call Monitor can only be used to display camera views
and cannot be used to configure any settings. To perform functions
such as Sequence function on Call monitor, please configured the
sequence function settings under Main Monitor in advance.
Click to display the Layout Bar as shown below. Select a layout type for
the live view display on the Main Monitor. For details, please refer to
4.2 Layout Switching.
Click to display system or camera icons/info on the live view screen.
For details, please refer to 4.4 OSD Overlay.
Click to display the Change Channel Bar as shown below. To switch the
selected camera to a specific channel, please refer to 4.3 Channel
Switching.
Click to enter the System Setting menu. Please refer to 6. System
Configuration.
Click to bring up the Logout Confirmation window and then click Yes to
log out the system (see 4.8 Logout). To log in, please refer to 3.2.1
Login.
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
43
to switch