I/O Control - EverFocus EMV1200 FHD User Manual

6.7.5

I/O Control

You can configure the connected device settings such as RS-232, RS-485 or GPS on this page.
Please connect the devices to the system before configuring the I/O Control settings. Please
refer to 2.5.4 D-Sub Cable for device connection.
【 RS-232 】
Type: Select a type.
Baud Rate: This field is to set the speed at which is used to transmit instruction or
information through the RS-232 port on the mobile DVR. There are eight different speeds:
1200 BPS, 2400 BPS, 4800 BPS, 9600 BPS, 19200 BPS, 38400 BPS, 57600 BPS and 115200 BPS.
Data Bit: This field is the data bit at which you will be transferring. There are two settings for
this option: 8 or 7.
Stop Bit: This field is to set the stop bit for the RS-232 connection. There are two different
stop bits, 1 or 2.
Parity: This field is to select the parity level at which you will be connected. You can choose
between None, Odd, or Even parity levels.
Note: For details on the RS-232 related settings, please consult the Technical Support
Department of EverFocus
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
ts@everfocus.com.tw
117