Ptz - EverFocus PARAGON FHD 16x4 User Manual

4.1 PTZ

You can use the PTZ Control Panel to control the connected PTZ cameras. To bring up the PTZ
control panel, on the OSD Root Menu, click the PTZ button
The following actions can be performed using the PTZ Control
Panel:
1. To bring up the PTZ OSD menu (only supported for
EverFocus eZ.HD PTZ cameras):
a. Click the Preset button.
b. Click the Preset number 95.
c. Click the Go button.
2. To move the camera to the desired direction and angle,
click the Direction buttons.
3. To zoom in / out the camera view, click the Zoom buttons.
4. To adjust the camera focus, click the Focus buttons.
5. To adjust the Iris open to increase / decrease the amount of
light in, click the Iris buttons.
6. To program a Preset Position (if supported by the camera):
a. Move the PTZ camera to the desired position.
b. Click the Preset button.
c. Set up a preset number for the current position by
clicking the number buttons. The number will be
displayed in the number box.
d. Click the Set button to save the settings.
7. To jump to a Preset Position:
d. Click the Preset button.
e. Click the desired Preset number.
f. Click the Go button.
8. Shortcut for Preset 1 ~ 9:
a. Click digit 1 ~ 9 button without clicking any other
buttons.
b. The camera will seek that Preset Position.
.
42
PARAGON FHD 16x4