6.5.2
Sequence
You can configure up to 20 steps of the sequencing order for the Main / Call monitor. The
Sequence function will repeat continuously from step 1 to step 20 until interrupted.
Monitor Drop-Down: Select Main Monitor or Call Monitor for setting up the below
parameters.
Step: The sequencing order.
Camera: Select a camera for the specific step.
Dwell (sec): Sets up the dwell time between 0 and 60 seconds for each step.
Save: Click to save the settings.
After setting up the parameters, you can perform the Sequence function. To activate the
Sequence function, on the OSD Root Menu, click the Sequence button
sequence function will start. You can see the Sequence status icon
bottom of the screen. To end the sequence function, on the OSD Root Menu, click the
Sequence button again.
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
93
, the
displaying on the