Garmin G5 User Manual page 87

1.7.4.8 BACKLIGHT CONFIGURATION PAGE
Configuration
Setting
Used to set the backlight mode to automatic or manual. This setting
is also available at any time by pressing the power button.
Automatic mode sets the backlight intensity (display brightness)
Current Mode
based on the photocell (ambient light sensor) input on the G5.
Manual mode allows for setting the backlight intensity by changing
the Backlight percentage directly. Manual brightness control is
available at any time by pressing the power button.
Used to set the backlight mode that will be active each time the
Default Mode
unit is powered on.
Photocell Input Displays the current input on the unit's light sensor (0-100%).
Display/Manual Displays the current backlight level (0-100%). Naming convention
Brightness depends on the current backlight mode selected.
Minimum
Sets the minimum display brightness setting that will occur in
Display
automatic mode. The default value is 20%.
Brightness
Maximum
Sets the maximum display brightness setting that will occur in
Display
automatic mode. The default value is 100%.
Brightness
Filter Time Adjusts the speed (in seconds), that the brightness level responds to
Constant changes in the photocell input.
190-02072-00 Rev. B
Table 1-18 Backlight Configuration Settings
Garmin G5 User's Manual
Installation Manual
Description
75