Garmin G5 User Manual page 109

V ADJUSTED FOR TRUE AIRSPEED OR MACH NUMBER
NE
(OPTIONAL)
NOTE: Mach number data is only available when the G5 is installed as part of
a G3X/G3X Touch system and is receiving air temperature data from another
ADAHRS.
The airspeed indicator can optionally be configured to display V
airspeed or maximum Mach number (MMO). This is useful in aircraft where true
airspeed or Mach number must be kept below a certain limit. If configured, the G5
can display V based on TAS or Mach in addition to IAS, which will cause the displayed
NE
value for V to be reduced at high altitudes. A solid red band is used between the TAS
NE
or Mach limit and the actual indicated value for V
VSPEED REFERENCE
Vspeed references including V
to display on the G5, refer to the Installation Manual section for more information.
When airspeed is present, the Vspeeds configured are displayed at their respective
locations to the right of the airspeed scale, otherwise the Vspeeds are displayed at the
bottom of the airspeed indicator.
190-02072-00 Rev. B
NE
, V , V , V , V , V
NE no so s1 fe a
Vspeed References
Garmin G5 User's Manual
Pilot's Guide
adjusted for true
NE
.
, V , V , V , V , V , can be configured
x y Yse g r
Vspeed References
97