Example 8: Recalling A Global Preset - Extron electronics MPX 866 A User Manual

im Vertrieb von
Operation, cont'd
2.
Figure 3-39 — Enter Save Preset mode
3.
Figure 3-40 — Select the preset
4.
Figure 3-41 — Press the Enter button

Example 8: Recalling a global preset

In the following example, a preset is recalled to become the current confi guration.
The steps show the front panel indications that result from your action.
1.
www.camboard.de
MPX 866 A Media Presentation Matrix Switcher • Operation
3-24
CAMBOARD Electronics
Press and hold the Preset button for approximately 2 seconds until it blinks
(fi gure 3-39).
All input and output LEDs with assigned presets light.
If you then save the configuration to a lit preset number,
the configuration data at that preset location will be overwritten.
Press and hold the Preset button until the
Preset LED blinks.
Release the
Preset button.
2 seconds
PRESET PRESET
= Blinking LED
Press and release the input or output button for the desired preset
(fi gure 3-40).
Press and release the Computer Output 1 button.
The LED blinks to indicate that this preset
number is selected but not saved.
1 2 3
COMPUTER/AUDIO OU
Preset 15 Preset 16 Preset 17 Preset 18
= Blinking LED
Press and release the Enter button (fi gure 3-41). The current confi guration is
now stored in the selected memory location.
Press the Enter button to
save the preset.
CONTROL
ENTER PRESET ESC
VIEW
All input LEDs
return to the
The Enter and Preset LEDs
unlit state.
return to the unlit state.
Press and release the Esc button (fi gure 3-42).
Tel. 07131 911201
Fax 07131 911203
Lit
(Preset Assigned) (Preset Unassigned)
1 2
COMPUTER/AUDIO OU
Preset 15 Preset 16 Preset 17
CONTROL
4
ENTER PRESET
The Enter LED blinks to indicate
the need to save the preset.
The Preset LED continues to blink.
ce-info@camboard.de
Unlit
3 4
Preset 18
VIEW