im Vertrieb von
Matrix Software, cont'd
Update fi rmware
The fi rmware upgrade utility provides a way to replace the fi rmware that is coded
on the switcher's control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the fi rmware chip.
Update the switcher fi rmware as follows:
N The update fi rmware utility is for replacing the fi rmware that controls all
1.
2.
3.
N The Ethernet connection is much faster than the RS-232 connection. Extron
4.
Figure 5-6 — Open fi le window and fi rmware load
www.camboard.de
MPX 866 A Media Presentation Matrix Switcher • Matrix Software
5-10
CAMBOARD Electronics
switcher operation. This is not the page to insert your own HTML pages.
See Upload HTML fi les to insert custom HTML pages.
Visit the Extron web site, www.extron.com, select the CrossPoint/MAV Plus
product category, and select the latest fi rmware install package (*.exe fi le) for
download. Note the folder to which you save the fi rmware fi le.
Run the executable (*.exe) fi le to decompress the fi rmware fi le.
Start the Matrix Switcher Control Program and connect to the matrix switcher.
See Using the software in this chapter, steps 1 through 4, starting on page 5-3.
recommends using the Ethernet connection rather than the serial port for
fi rmware uploads.
Click Tools > Update fi rmware. The open fi le window appears (fi gure 5-6).
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de