Table of Contents
Advertisement
im Vertrieb von
Operation, cont'd
Creating a confi guration
The current confi guration can be changed using the front panel buttons. Change
the current confi guration as follows:
1.
2.
3.
4.
5.
N •
www.camboard.de
MPX 866 A Media Presentation Matrix Switcher • Operation
3-8
CAMBOARD Electronics
Press the Esc button to clear any input LEDs, output LEDs, or control LEDs
that may be lit.
Select to confi gure video, audio, or both by pressing the Video button and/or
Audio button.
Select the desired input and output(s) by pressing the input and output buttons.
To indicate potential ties, output LEDs blink when an output is selected but
not tied to the input.
To indicate current ties, output LEDs light steadily when an input is tied to
the output.
To clear unwanted outputs, press and release the output buttons associated
with the lit LEDs. To indicate potential unties, output LEDs blink when an
output is deselected but not untied from the input.
Press and release the Enter button to accept the tie or to break an existing tie.
Repeat steps 1 through 4 to create additional ties until the desired
confi guration is complete.
Video ties cannot be made between the computer video group and the low
resolution video group.
•
Audio ties can only be made to the computer video/audio subgroup
(outputs 1 through 6).
•
Video and audio ties between the low resolution video input subgroup and
the low resolution video output subgroup are always made with the audio
broken away. In such an operation, the switcher automatically ties the audio
to an output in the computer video/audio outputs subgroup (outputs 1
through 6) as follows:
If the video is tied to output 7, the audio is tied to output 1.
If the video is tied to output 8, the audio is tied to output 2.
If the video is tied to output 9, the audio is tied to output 3.
If the video is tied to output 10, the audio is tied to output 4.
If the video is tied to output 11, the audio is tied to output 5.
If the video is tied to output 12, the audio is tied to output 6.
•
If video is selected for confi guration (the Video LED is lit) and you press the
input button for an input in one group and then try to select an output in the
other group, the associated output button cannot be selected. The associated
input LED remains lit.
•
Only one video input and one audio input can be tied to an output.
•
If a tie is made in which the selected output was previously tied to another
input, the older tie is broken in favor of the newer tie.
•
If an input with no tie is selected, only that input's LED lights.
•
When the Video and Audio LEDs are lit, if an input with an audio tie but
no video tie is selected, the input's LED lights and the output LED and I/O
Audio LEDs blink.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Advertisement
Table of Contents
