Table of Contents
Advertisement
im Vertrieb von
Installation, cont'd
Low resolution video group
The switcher can connect to up to as many as six S-video and/or composite video
sources and output to as many as six video devices.
c
N Video Input 9 serves as a timing reference for all other low resolution
d
N The switcher must be set to accept video inputs 11 through 14
e
N If the input tied Video Output 7 or Video Output 8 is S-video, the
f
N If the input tied Video Output 9 or Video Output 10 is composite
g
N The switcher passes the tied input to these outputs with no
www.camboard.de
MPX 866 A Media Presentation Matrix Switcher • Installation
2-4
CAMBOARD Electronics
Video Input 9 and Video Input 10 (composite video inputs) —
Connect composite video sources to these female BNC connectors.
video group inputs. If one of the inputs is synced to a blackburst
generator, connect that source to Video Input 9.
Video Input 11 through Video Input 14 —
S-video inputs — Connect an S-video source to a pair of female
BNC connectors. Connect luma (Y) and chroma (C) as shown at
right.
Composite video inputs — Connect a composite video source to
the Video (top) connector in a pair of female BNC connectors as
shown at right.
as either S-video or composite video. Composite video is the
default. See Selecting composite video or S-video in chapter 3,
Operation, to change the setting.
Composite video outputs (Video Output 7 and Video Output 8) —
Connect composite video displays to these female BNC connectors.
switcher encodes the input to composite video.
If the tied input is composite video, the switcher passes it through to the output
with no processing.
S-video outputs (Video Output 9 and Video Output 10) —
Connect S-video displays to these female BNC connectors.
video, the switcher decodes the input to S-video.
If the tied input is S-video, the switcher passes it through to the
output with no processing.
Pass-through outputs (Video Output 11 and Video Output 12) —
Connect S-video or composite video displays to these female
BNC connectors. Connect S-video Y and C or composite
video as shown at right.
signal processing; an S-video input is output as S-video, a
composite video input is output as composite video.
Tel. 07131 911201
Fax 07131 911203
GENLOCK
9
VIDEO
10
VIDEO
11
Y/VID
C
12
Y/VID
C
7
9
Y
C
11
12
Y/VID
C
S-video Composite
video
ce-info@camboard.de
Advertisement
Table of Contents
