Extron electronics MPX 866 A Specifications

Specifications — MPX 866 A
Video
Routing
RGB/VGA ........................ 8 x 6 matrix
S-video/composite video 6 x 6 matrix
Gain ............................................... Unity
Bandwidth
RGB/VGA ........................ 300 MHz (-3 dB), fully loaded
S-video/composite video 150 MHz (-3 dB), fully loaded
Differential phase error .............. 1.0º at 3.58 MHz and 4.43 MHz
Differential gain error ................. 1.0% at 3.58 MHz and 4.43 MHz
Crosstalk
RGB/VGA ........................ <-50 dB @ 10 MHz, <-30 dB @ 100 MHz
S-video/composite video -50 dB @ 5 MHz
Switching speed ........................... 100 ms (max.)

Video input

Number/signal type
RGB/VGA ........................ 8 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs
S-video/composite video Up to 4 S-video and 2 composite video
Connectors
RGB/VGA ........................ 8 female 15-pin HD
S-video/composite video 4 x 2 female BNC for S-video or composite video (inputs 11 to 14) and
Nominal level ............................... 1 Vp-p for Y of S-video and for composite video
Minimum/maximum levels
RGB/VGA ........................ Analog: 0.3 V to 1.5 Vp-p with no offset
S-video/composite video Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency (RGB) ...... 15 kHz to 145 kHz
Vertical frequency (RGB) ............ 30 Hz to 170 Hz
Return loss
RGB/VGA ........................ <-40 dB @ 5 MHz
S-video/composite video <-30 dB @ 5 MHz
DC offset (max. allowable, S-video or composite video)
External sync (genlock, S-video or composite video)

Video output

Number/signal type
RGB/VGA ........................ 6 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, (follows input type)
S-video/composite video 2 S-video, 2 S-video or composite video, and 2 composite video
Connectors
RGB/VGA ........................ 6 female 15-pin HD
S-video/composite video 2 x 2 female BNC for S-video only (outputs 9 and 10)
1-2
MPX 866 A Media Presentation Matrix Switcher • Specifications
0 - 10 MHz: no more than +0.1 dB to -0.1 dB
0 - 30 MHz: no more than +0.1 dB to -0.5 dB
or
6 composite video
2 x 1 female BNC for composite video or genlock only (inputs 9 and 10)
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
1.5 V
0.3 V to 0.4 Vp-p
2 x 2 female BNC for S-video or composite video pass-through (outputs 11 and 12)
2 x 1 female BNC for composite video only (outputs 7 and 8)