Table of Contents
Advertisement
im Vertrieb von
www.camboard.de
CAMBOARD Electronics
Press the Video Input button for one of the confi gurable inputs (11 through 14)
3.
(fi gure 3-48).
Press and release the Video Input 13 button.
The Video Input 13 LED blinks.
VIDEO INPUTS
10
11
12
= Lit LED,
= Blinking LED
Figure 3-48 — Input selection and video format display
4.
To change the format, press and release the Video Output button, 7 or 8, that
relates to the desired format (fi gure 3-49).
Press and release the Video Output button
to change the video format as follows:
7 — Composite
8 — S-video
In this example, the input is set to S-video.
7
8
9
VIDE
= Lit LED,
= Unlit LED
Figure 3-49 — Video format selection
N If desired, select another of confi gurable video inputs 11 through 14 to view or
change the video format for that input.
5.
Press and release the Video button to exit the Video mode (fi gure 3-50).
Press the Video button to exit Video mode.
I/O
All input LEDs and output LEDs
return to the unlit state.
AUDIO
VIDEO
The Video LED stops blinking and lights steadily.
The Audio button lights.
Figure 3-50 — Exit Video mode
N For the switcher to recognize the change and create a new confi guration map,
you must create a new tie for the input whose format was changed.
Tel. 07131 911201
MPX 866 A Media Presentation Matrix Switcher • Operation
Fax 07131 911203
13
14
7
Either the Video Output 7 LED or
the Output 8 LED lights to indicate
the video format as follows:
7 — Composite
ce-info@camboard.de
8
9
VIDE
8 — S-video
3-27
Advertisement
Table of Contents
