Example 5: Viewing Video And Audio, Audio Only, And Video Only Ties - Extron electronics MPX 866 A User Manual

im Vertrieb von
Operation, cont'd

Example 5: Viewing video and audio, audio only, and video only ties

The following example shows the viewing of the video and audio, audio-only,
and video-only ties in the current confi guration. The steps show the front panel
indications that result from your action.
N This example assumes that you have performed example 1, example 2, and
1.
Figure 3-27 — Clear all selections
2.
3.
Figure 3-28 — Select video and audio
www.camboard.de
MPX 866 A Media Presentation Matrix Switcher • Operation
3-18
CAMBOARD Electronics
example 3.
Press and release the Esc button (fi gure 3-27).
Press the Esc button to clear all selections.
CONTROL
1
ESC
ENTER PRESET VIEW
= Blink once
The LED blinks once.
1
Press and release the View button to enter View-Only mode. The View button
lights red.
To select both video and audio for viewing, if necessary, press and release the
Video button and the Audio button (fi gure 3-28).
I/O
In this example, the Audio LED blinks to indicate audio
breakaway (assuming you have performed example 1, 2, and 3).
VIDEO AUDIO
Press the Video button to Press the Audio button
toggle on and off. to toggle on and off.
The LED lights when The LED lights or
selected. blinks when selected.
Until you select an input, the buttons for all untied outputs light.
1
Tel. 07131 911201
Fax 07131 911203
2 3 4 5
COMPUTER/AUDIO OUTPUTS
ce-info@camboard.de
6