Extron electronics MPX 866 A User Manual page 3

im Vertrieb von
Media Presentation Matrix Switcher
Installation
Step 1
Turn off power to the input and output devices,
and remove the power cords from them.
Step 2 — Inputs
a. Connect up to 8 high resolution
video inputs to the 15-pin HD
connectors in the computer video group.
b. Connect up to 6 S-video and
composite video inputs to the female
BNC connectors in the video group.
N
Inputs 9 and 10 are composite
video only. Input 9 is designated
as reference input for genlock.
Inputs 11 through 14 can be either
S-video or composite video.
See Selecting composite video or
S-video in chapter 3, Operation.
c. Connect up to 14 stereo or mono audio
inputs to the 5-pin captive screw connectors
in either group.
Tip
Ring Ring
Sleeve (s)
Tip
Ring
Balanced Input
(high impedance)
Do not tin the wires!
Step 3 — Outputs
Connect up to 6 high resolution
a.
video devices to the 15-pin HD
connectors in the computer/
audio output subgroup.
b. Connect up to 6 S-video and/or
composite video devices to the female
BNC connectors in the video group.
N
Outputs 7 and 8 encode an
S-video input to composite video
output and pass through a composite
video input.
Outputs 9 and 10 decode a composite
video input to a composite video output
and pass through an S-video input.
Outputs 11 and 12 are pass through
only. The output is in the same video
format as the input.
www.camboard.de
CAMBOARD Electronics
Quick Start — MPX 866 A
Tip
Sleeve
Tip
Sleeve
Unbalanced Input
(high impedance)
0.3" (7 mm) max.
Tel. 07131 911201
MPX 866 A Media Presentation Matrix Switcher • Quick Start
Fax 07131 911203
Connect up to 6 balanced or unbalanced
c.
stereo audio or mono audio devices to
the 5-pin captive screw connectors in the
computer/audio output subgroup.
Tip
Ring
NO GROUND HERE.
Sleeve (s)
Tip
Ring
NO GROUND HERE.
Balanced Stereo Output Unbalanced Stereo Output
C Connect the sleeve to ground.
Connecting the sleeve to a negative (-)
terminal will damage the audio output
circuits.
Step 4 — RS-232
If desired, connect control systems and/or PCs to
the rear panel RS-232 ports.
0.3" (7 mm) max.
Do not tin the wires!
Ground (
Rx Receive (Rx)
Tx Transmit (Tx)
Bidirectional
Step 5 — LAN
If desired, connect the switcher to a controlling
device, either directly (using a crossover cable) or
via a networked connection (using a patch cable).
Step 6 — Power
Plug the switcher into a grounded AC source.
Defi nitions
Tie — An input-to-output connection.
Set of ties — An input tied to 2 or more outputs.
Confi guration — One or more ties or sets of ties.
Current confi guration — The currently active
confi guration (also called confi guration 0).
Global preset — A confi guration that has been
stored. One global preset can be assigned
to each input button. When a global preset
is retrieved from memory, it becomes the
current confi guration.
ce-info@camboard.de
Tip
Sleeve (s)
Tip
0.3" (7 mm) max.
Do not tin the wires!
PC
)
Rx
Tx
QS-1