Ethernet Link; Ethernet Connection; Default Ip Addresses - Extron electronics MPX 866 A User Manual

im Vertrieb von
SIS ™ Programming and Control, cont'd

Ethernet Link

The rear panel LAN connector on the switcher can be connected to an Ethernet
LAN or WAN. This connection makes SIS control of the switcher possible using a
computer connected to the same LAN or WAN.

Ethernet connection

The Ethernet cable can be terminated as a straight-through cable or a crossover
cable and must be properly terminated for your application (fi gure 4-3).
•
•
Figure 4-3 — RJ-45 Ethernet connector pin assignments

Default IP addresses

To access the via the Ethernet port, you will need the Extron IP address, and may
need the subnet mask and the gateway address. If the IP address has been changed
to an address comprised of words and characters, the actual numeric IP address can
be determined using the ping (ICMP) utility (see appendix A, Ethernet Connection,
for more details). If the addresses have not been changed, the factory-specifi ed
defaults are:
• IP address
• Gateway address
www.camboard.de
MPX 866 A Media Presentation Matrix Switcher • SIS Programming and Control
4-4
CAMBOARD Electronics
Crossover cable — Direct connection between the computer and the
MPX switcher.
Patch (straight) cable — Connection of the MPX switcher to an Ethernet
LAN.
Side Clip Down
Pins 1 2 3 4 5 6 7 8
RJ-45
connector
1 2 3 4 5 6 7 8
1&2 7&8
3&6 4&5
192.168.254.254
0.0.0.0
Tel. 07131 911201
Fax 07131 911203
Patch (straight) cable
Side 1
Pin Wire color
1 White-orange
2 Orange
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
Crossover cable
Side 1
Pin Wire color
1 White-orange
2 Orange
Twisted
Pairs
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
• Subnet mask
ce-info@camboard.de
Side 2
Pin Wire color
1 White-orange
2 Orange
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
Side 2
Pin Wire color
1 White-green
2 Green
3 White-orange
4 Blue
5 White-blue
6 Orange
7 White-brown
8 Brown
255.255.0.0