Paper Exit - Ricoh SP 330DN Service Manual

Hide thumbs Also See for SP 330DN:

Table of Contents

Fusing and Exit

[A]: Thermostat: Operation stops when the temperature surrounding the hot roller is more than

[B]: Fusing thermistor: SC543 will be generated when the surface temperature of the hot roller

is more than 235°C.

[C]: Non-contact thermistor: SC553 will be generated when the surface temperature of the hot

roller is more than 220°C.

Paper Exit

The paper exit guide-plate [A] holds down the trailing edge of each sheet of paper after it exits in

order to prevent it from obstructing following sheets of paper as they exit.

M0C3/M0C4/M0C5/M0C6/M0C7

Table of Contents