Debug Item List - Ricoh SP 330DN Service Manual

Debug Item List:

Item name
Get Memory When this item is selected, Start Address, Size, and the unit (bytes, Kb, or
Mb) can also be selected. Start Address and Size should be smaller than the
total engine memory size.
Get Flash When this item is selected, Offset, Size, and the unit (bytes, Kb, or Mb) can
also be selected. Offset and Size should be smaller than the total engine
flash memory size.
Get Debug
Get the debug log data from the log buffer.
Message
The log buffer is set to 3000 lines by default for MF models and 2000 lines by
default for P models.
Get Event Get the log data from the event buffer.
Log
Get Error Log Get the log data from the error buffer.
Clear Error Reset the error buffer to erase all data from the flash memory.
Log
Set Panel Set the panel supported language list.
Language
SM
Description
5-73 M0C3/M0C4/M0C5/M0C6/M0C7
Capturing the Debug Logs