Table of Contents
Advertisement
3
Installing the Pod Brackets
and Seat Belt
MyRide-Equipped Machines Only
Parts needed for this procedure:
1
Left seat belt bracket (MyRide machines only)
1
Right seat belt bracket (MyRide machines only)
2
Partial-thread bolt (3/8 x 2 inches)
2
Small washer
2
Locknut (3/8 inch)
1
Left pod bracket
1
Bumper
1
Right pod bracket (MyRide machines only)
3
Thread-forming screw (5/16 x 3/4 inch)
1
Seat belt tongue assembly
1
Seat belt buckle assembly
2
Carriage screw (7/16 x 1 inch)
2
Locknut (7/16 inch)
Procedure
1.
Install the seat belt brackets to the seat platform
with 2 partial-thread bolts (3/8 x 2 inches), 2
small washers, and 2 locknuts (3/8 inch) as
shown in
Figure
1. Partial-thread bolts (3/8 x
2 inches)
2. Small washer
3. Seat belt bracket
2.
Install the bumper to the left pod bracket
8).
1. Bumper
7
7.
Figure 7
4. MyRide platform
5. Locknut (3/8 inch)
Figure 8
g310258
(Figure
g310245
Advertisement
Table of Contents
