Download Print this page

Connecting The Battery Cables; Checking The Hydraulic Fluid - Toro 02904 Installation Instructions Manual

Limited slip differential lock kit

Advertisement

3. Insert the limited slip differential valve into the traction
manifold and thread the valve in by hand
4. Check that the O-ring on the limited slip differential
valve has not moved out of place.
5. Torque the valve to 136 to 149 N∙m (100 to 110 ft-lb).
Finishing Installing the Kit
Lowering the Operator's Platform
1. Lower the platform carefully; refer to
Raising the Operator's Platform (page
2. Move the locking-latch handle toward the front of the
mower as the platform nears the fully lowered position;
refer to
Figure 4
in
(page
3).
Note: This ensures that the latch hooks clear the
locking bar.
3. Fully lower the platform and move the locking handle
toward the rear of the mower
hooks fully engage the locking bar.

Checking the Hydraulic Fluid

Check the hydraulic fluid level in the tank—add hydraulic
fluid as needed; refer to Checking the Hydraulic Fluid in the
Operator's Manual for your machine.
(Figure
Figure 4
3).
Raising the Operator's Platform
(Figure
7) until the latch
Figure 7

Connecting the Battery Cables

6).
WARNING
Incorrect battery cable routing could damage the
machine and cables, causing sparks. Sparks can
cause the battery gases to explode, resulting in
personal injury.
• Always disconnect the negative (black) battery
cable before disconnecting the positive (red)
cable.
in
• Always connect the positive (red) battery cable
before connecting the negative (black) cable.
1. Connect the positive battery cable to the battery post;
refer to
2. Align the insulator cover of the battery-cable terminal
and close the cover; refer to
(page
2).
Note: Closing the cover will tighten the battery cable
terminal from the positive battery post.
3. Connect the negative battery cable to the battery post;
refer to
4. Align the insulator cover of the battery-cable terminal
and close the cover; refer to
the Battery (page
Note: Closing the cover will tighten the battery cable
terminal from the negative battery post.
g037203
4
Disconnecting the Battery (page
Disconnecting the Battery
Figure 3
in
Disconnecting the Battery (page
Figure 3
2).
2).
2).
in
Disconnecting

Advertisement

loading