Table of Contents
Advertisement
Where to find the external LCD diagnostics handset
Location
The external LCD diagnostics handset is connected to the
server with an external cable.
Note: Pay attention to the following steps when unplugging the external handset:
Step 1. Press the plastic clip on the plug in the shown direction.
Step 2. Gently pull out the cable from the connector while keeping the clip pressed down.
Callout
The LCD diagnostics handset that can be connected to
1
the server with an external cable.
The magnetic bottom with which the device can be
2
attached to the top or side of the rack. This is helpful and
can free up both hands for certain service tasks.
The external diagnostics connector on the front of the
3
server that can be used to connect an external LCD
diagnostics handset.
Chapter 2
.
Server components
27
Advertisement
Table of Contents
