Table of Contents
Advertisement
Procedure
Step 1.
Touch the static-protective package that contains the new RAID super capacitor module to any
unpainted surface on the outside of the server. Then, take the new RAID super capacitor module
out of the package and place it on a static-protective surface.
Step 2.
Install the super capacitor module.
Figure 132. Super capacitor installation on the air baffle
1. Open the retention clip on a holder.
2. Put a super capacitor module into the holder.
3. Press it down to secure it into the holder.
Step 3.
Connect the super capacitor module to an adapter with the extension cable that comes with the
super capacitor module. See "RAID super capacitor modules" on page 62.
After you finish
Complete the parts replacement. See "Complete the parts replacement" on page 397.
ThinkSystem SR665 Maintenance Manual
294
Advertisement
Table of Contents
