Table of Contents
Advertisement
3
Power button with power status LED
You can press the power button to turn on the server when you finish setting up the server. You also can hold
the power button for several seconds to turn off the server if you cannot turn off the server from the operating
system. The power status LED helps you to determine the current power status.
Status
Color
Solid on
Green
Slow blinking
Green
(about one flash
per second)
Fast blinking
Green
(about four
flashes per
second)
None
Off
4
Network activity LED
When an OCP 3.0 Ethernet adapter is installed, the network activity LED on the front I/O assembly helps you
identify the network connectivity and activity.
Status
Color
On
Green
Blinking
Green
None
Off
Note: If no OCP 3.0 Ethernet adapter is installed, this LED is off.
ThinkSystem SR665 Maintenance Manual
24
Description
The server is on and running.
The server is off and is ready to be powered on (standby state).
The server is off, but the XClarity Controller is initializing, and the server is not
ready to be powered on.
There is no ac power applied to the server.
The server is connected to a network.
The network is connected and active.
The server is disconnected from the network.
Description
Advertisement
Table of Contents
