Step 3.
Remove the two 7mm backplanes from the 7mm drive cage. See "Remove the 7mm drive
backplane" on page 203.
Step 4.
Remove the 7mm drive cage securing clip as shown.
Figure 157. 7mm drive cage securing clip removal
Step 5.
(Optional) Remove the riser 2 assembly from the riser 2 slot on the system board. See "Remove a
PCIe adapter and riser 1/2 assembly" on page 346.
After you finish
If you are instructed to return the old cage, follow all packaging instructions and use any packaging materials
that are provided.
ThinkSystem SR665 Maintenance Manual
340