Invacare® Pronto™ M41 Series with SureStep®
1. Loosen ball joint A.
2. Position linkage.
3. Tighten ball joint.
5.3.2 Adjusting Height of Linkage Switch
Risk of damage to clamping lever
If you tighten clamping lever to an improper
torque, it might either come loose or get
damaged.
– Tighten clamping lever only hand-tight.
1. Loosen clamping lever A.
2. Adjust height of linkage switch.
3. Tighten clamping lever.
5.3.3 Rotating RJM/RJM-LF remote
•
4 mm Allen key
•
8 mm wrench
32
1.
Loosen screws A and nuts B.
2.
Rotate secondary remote around its longitudinal axis.
3. Retighten screws and nuts.
1553378-G