Adjusting Position Of Joysticks And Remote - Invacare Pronto M41 Series User Manual

5.3.1 Adjusting position of joysticks and remote

Linkage joystick and RJM/RJM-LF remote
Risk of damage to screws
If you tighten screws to an improper torque, they
might either come loose or get damaged.
– Tighten the screws to a torque of 3 Nm ± 10 %.
• 3 mm Allen key
1. Loosen screws A.
2. Move joystick or remote to desired position on the
linkage.
3. Tighten screws.
1553378-G
Switch joystick
1. Bend flexible joystick bracket A to desired position.
Linkage orientation
You can additionally adjust the position of joysticks and
remote via ball joints in the linkage. The ball joints are freely
movable and offer you infinite adjustment possibilities.
Risk of damage to ball joints
If you tighten ball joints to an improper torque,
they might either come loose or get damaged.
– Tighten the ball joints to a torque of 35 Nm.
• 19 mm wrench (2x)
Setup
31