Invacare Pronto M41 Series User Manual page 97

With surestep
Hide thumbs Also See for Pronto M41 Series:
Table of Contents

Advertisement

CAUTION!
Risk of injury if the mobility device is not
properly secured during use as a vehicle seat.
– If possible, the user should always leave the
mobility device to use a vehicle seat and the
safety belts provided with the vehicle.
– The mobility device should always be anchored
facing in the transport vehicle's intended
direction of travel.
– The mobility device must always be secured
in accordance with the mobility device and
anchoring system manufacturers' user manual.
– Always remove and secure any accessory
parts fixed to the mobility device such as chin
controls or tables.
– If your mobility device is fitted with an angle
adjustable backrest, then it must be placed in
an upright position.
– Fully lower elevated legrests, if fitted.
– Fully lower the seat lifter, if fitted.
CAUTION!
Risk of injury if a mobility device that is not
fitted with leak-proof batteries is transported
in a vehicle.
– Only ever use leak-proof batteries.
1553378-G
CAUTION!
Risk of injury or damage to the mobility device
or to the transporting vehicle, if the legrests are
in a raised position while the mobility device is
used as a vehicle seat.
– Always completely lower height-adjustable
legrests, if fitted.
In order to use a mobility device as a motor vehicle
seat, it needs to be fitted with tie-down points
to enable anchoring in the motor vehicle. These
accessories may be included in the standard scope of
mobility device order and delivery in some countries
(UK for example), but may also be obtained from
Invacare as an option in other countries.
This mobility device complies with the requirements of ISO
7176-19 and may be used as a vehicle seat in connection
with an anchoring system that has been checked and
approved in accordance with ISO 10542. The transporting
vehicle must be professionally converted to anchor the
mobility device. Contact your vehicle's manufacturer for
more information.
The mobility device has undergone a crash test in which
it was anchored in the transporting vehicle's direction of
travel. Other configurations were not tested. The crash test
dummy was secured using pelvic and upper body safety
belts. Both types of safety belt should be used in order to
minimize the risk of injuries to head or upper body.
Transport
97

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents